Astrid 2209GR is an 85 cm bollard light made from extruded aluminium profile, powder-coated graphite (RAL 7016). The body is 14 × 14 cm in section with rounded corners and vertical fluting along its full height; at the top, behind the ribs, an opal PMMA diffuser lets out diffused light.
What light it gives
The built-in Osram LED module is 8.02 W and the whole fitting draws 10.6 W. The light source is included, so no bulb is needed. It delivers 271 lm at 4000 K, a neutral white; CRI 80. This is wayfinding light: it marks a path edge, terrace or driveway and casts a soft glow around the post, but it will not light a whole yard. ULOR 50% means half the light goes above the fitting, so the bollard is visible from a distance. The manufacturer states low flicker (Pst max 1, SVM max 0.4) and an L80B50 module life of over 70,000 hours; module and driver are replaced by a professional service.
It has a DALI2 driver, so dimming and control run over the DALI bus; an ordinary phase dimmer will not work with it.
Mounting and connection
The bollard is bolted down through three ø9 mm holes at 120° on a ø65 mm circle. Foundation parts are sold separately: concrete anchor 205, ground anchor 206, concrete-foundation adapter 206S and mounting adapter 3080GA. The terminals take conductors up to 5 × 2.5 mm² with loop-through, so live, neutral, earth and the DALI pair run on one cable along a whole row; round cable up to ø12.5 mm. Inrush current is 6.7 A for 2.4 µs, and the manufacturer states how many fittings one breaker carries: 46 on B10, 74 on B16 or C10, and 119 on C16. Protection class I requires an earth conductor.
Build and use
IP65 protects against dust and water jets, and IK10 is the highest common impact rating, which matters for a post beside a driveway. The bollard weighs 6.24 kg. The form is modern in a Scandinavian way: a geometric body without ornament whose rhythm comes from the fluting alone. The manufacturer intends it for paths, terraces, residential streets and driveways.