NORLYS Astrid 2214CB LED bollard light copper brown 2700K IP65 85 cm

NORLYS Astrid 2214CB is an 85 cm LED bollard designed to distribute light evenly along outdoor routes and seating areas. Its slender square profile has a copper-brown RAL 8004 finish. Vertical ribs protect the milky diffuser and create a measured architectural rhythm, so the fitting remains a decorative part of a garden scheme during daylight as well as after dark.

Warm, diffused light at 2700K

The integrated LED module delivers 239 lm while the complete luminaire consumes 10.4 W. A 2700K colour temperature produces warm light suited to a terrace, entrance, path or driveway. The milky PMMA diffuser spreads output sideways, while an ULOR value of 50% describes the share emitted above the horizontal. Colour rendering is CRI 80, chromaticity tolerance is SDCM3, and the declared module life exceeds 70,000 hours to L80B50.

Aluminium construction, IP65 and IK10

The body uses an extruded, powder-coated aluminium profile with an EPDM cable gland. IP65 means the enclosure is dust-tight and protected against water jets, while IK10 denotes high mechanical impact resistance. The fitting is protection class I and therefore requires a protective earth connection. NORLYS specifies an ambient operating range from -20 to +45°C and identifies this model for outdoor use only.

Phase dimming and installation

Astrid operates at 220–240 V and includes both the LED module and its driver. Brightness can be adjusted with a compatible leading-edge or trailing-edge phase dimmer. The base measures 14 × 14 cm and the complete fitting measures 14 × 14 × 85 cm. Installation uses three 9 mm fixing holes spaced at 120° on a 65 mm diameter circle. Concrete anchors, ground anchors and foundation adapters are available separately and should be chosen for the mounting surface.