NORLYS Frigga 2151GR graphite LED bollard 50 cm 4000 K DALI2

NORLYS Frigga 2151GR is a 50 cm garden bollard finished in graphite RAL 7016. Its vertically ribbed aluminium body meets a square crystal-glass head with a satin inner surface. The contrast between the textured metal column and the geometric glass makes it a considered choice for modern and Scandinavian outdoor schemes.

A low light alongside a route

The luminaire occupies a 14 × 14 cm footprint and stands 50 cm high. These dimensions suit planning beside a garden path, terrace edge or driveway rather than treating it as a tall street-lighting column. Compare the height of the head with nearby planting and other features before positioning it, so the light is not hidden. Keep the body outside the usable walking width.

IP65 provides dust-tight protection and protection against water jets. The manufacturer's impact rating is IK06, which should not be read as a claim that the glass head cannot break. The installation instructions require any cracked protective glass to be replaced.

4000 K light with DALI2 control

The 2151 version produces neutral-white light at 4000 K, with a complete-luminaire output of 335 lm. The LED module is rated at 4.6 W; total luminaire consumption is 4.7 W. Its light is exposed rather than confined to a downward beam, and the manufacturer gives an upward light ratio of 85%. Take that distribution into account where a project requires light to be directed only towards the ground.

The LED module and electronic DALI driver are included. DALI2 control needs to be planned alongside the 220–240 V supply and the relevant control wiring. Both the light source and control gear can be replaced by a professional service; this is not a fitting for changing a conventional screw-in bulb yourself.

Fixings and the appearance of the glass

Mounting uses three 9 mm holes spaced at 120° on a 65 mm diameter circle. Fixing screws are not included, while anchors and mounting adapters are selected for the support surface and purchased separately. Installation and electrical work require a qualified person. The manufacturer notes that the crystal glass may develop an amber tint over time. Allow for that possible change when matching later additions to an established group of bollards.