NORLYS Frigga 2151AL LED garden bollard, silver, 50 cm, 4000 K

NORLYS Frigga 2151AL is a garden bollard with a vertically fluted body and a clearly defined glass head. The AL version has an aluminium-coloured RAL 9006 finish, giving it a silver appearance. Its body is made from powder-coated extruded aluminium, while the crystal-glass head is satin-finished on the inside.

A half-metre light beside the path

At 50 cm tall, with a footprint of 14 × 14 cm, this is a low outdoor bollard rather than a tall street lantern or a portable indoor floor lamp. It can be considered for the edge of a garden path, terrace or driveway, with the walking route itself kept clear. Before choosing its position, compare those measurements with planting beds and the edge of the paved surface.

The square section, regular fluting and silver surface give the fitting a modern, minimalist character. The glass head forms a separate decorative element above the straight-sided body and remains visible when the light is switched off.

Neutral-white light with DALI2 control

The built-in LED module produces neutral-white light at 4000 K. The complete luminaire delivers 335 lm and draws 4.7 W; the light source itself is rated at 4.6 W. Its open light distribution is not a narrow downward spotlight. Use the manufacturer's photometric data when planning spacing along a particular path, rather than relying on the lumen figure alone.

An electronic driver is included and supports DALI2. Plan the control arrangement around that system instead of assuming compatibility with any dimmer. The LED module and control gear can be replaced by a professional service provider; this is not a fitting intended for routine bulb replacement by the user.

Fixings and separately purchased accessories

Frigga is an outdoor luminaire rated IP65, with IK06 impact resistance. It is secured through three 9 mm holes positioned at 120° intervals on a 65 mm diameter circle. Installation and connection to the 220–240 V supply require an appropriately qualified person.

Mounting screws are not included. Norlys anchors and mounting adapters are also purchased separately and should be chosen for the supporting surface. The manufacturer notes that the glass may develop an amber tint over time. A cracked protective glass must be replaced.