Norlys Frigga 2153CS outdoor LED bollard rust brown 85 cm 3000 K DALI2

Norlys Frigga 2153CS is an outdoor LED bollard measuring 85 cm high, with a vertically fluted body and a glass head with a square outline. The manufacturer's CS designation, named Corten Steel, refers here to the finish of painted aluminium rather than a steel body. Its rust-brown profile is paired with crystal glass satin-finished on the inside.

Planning around paths and terraces

The 14 × 14 cm footprint allows its position beside a paved surface to be marked out before installation. At 85 cm, this is a low light point, not an overhead fixture for illuminating an entire driveway. When planning a garden, approach or terrace, compare that height with surrounding planting and keep the bollard itself outside the walking space.

The straight column, vertical ribs and geometric head suit modern and Scandinavian schemes. The construction provides the decorative detail without elaborate ornament. Norlys notes that the glass may develop an amber tint over time; allow for that change when coordinating a group of fixtures.

Warm light with DALI2 control

The built-in module produces 3000 K light, while the complete luminaire delivers 322 lm. These figures help when choosing low-level lighting alongside circulation routes, but do not determine bollard spacing on their own. The open light distribution is not a narrow beam aimed solely at the ground: the datasheet specifies an ULOR of 85%.

The LED module is rated at 4.6 W, whereas the luminaire consumes 4.9 W. This 2153CS version uses DALI2 control. Both the light source and control gear can be replaced by a professional service, so the module should not be described as permanently non-replaceable.

Fixed mounting and separate accessories

The fixture requires a 220–240 V supply and installation by a suitably qualified person. Its mounting uses three 9 mm holes on a 65 mm diameter circle, spaced at 120°. Anchors and adapters must be selected for the substrate and purchased separately. IP65 protection and IK06 impact resistance apply to this variant; neither represents unlimited resistance to impacts.