Norlys Halmstad 1346GR is a 49 cm LED garden bollard made from hot-dip galvanised steel, powder-coated in graphite RAL 7016. A square body and horizontal bars around the milky PMMA diffuser give it a restrained Scandinavian appearance.
A low-level fitting for garden routes
The 12 × 12 cm footprint helps establish the mounting position without allowing for a broad housing. At 49 cm high, this version is a low bollard rather than a tall garden lantern. It can be considered along paths, terrace boundaries and driveway edges, with the body kept clear of walking routes and door swings. Its straight lines suit contemporary landscape layouts, while the graphite finish can be coordinated with stone, timber or metal elements without introducing decorative scrollwork.
Distinguishing LED output from luminaire output
The integrated LED module produces neutral-white light at 4000 K. The complete fitting delivers 310 lm and consumes 8.5 W. The separate figures of 1059 lm and 6.7 W in the manufacturer's documentation describe the light source itself, not the light leaving the assembled bollard. Its distribution is open and partly screened from above, so this is not a fitting that directs all its light downwards.
Norlys specifies both trailing-edge and leading-edge phase dimming. Check the chosen dimmer's compatibility with the LED driver when planning the controls. The LED source and control gear can be replaced by a professional service; the module is not changed like an ordinary screw-in bulb.
Mounting details and separately purchased accessories
Three 9 mm fixing holes sit at 120° intervals on a 65 mm bolt circle. Compare this arrangement with the intended support before preparing the mounting surface. Ground anchors and mounting adapters are sold separately, allowing the required fixing to be selected for the installation. The fitting uses a 220–240 V supply and has Class II electrical protection, IP65 and IK10 ratings. Installation and service work should be carried out by appropriately qualified personnel following the Norlys instructions.
