NORLYS Halmstad 212GR is a low, 26 cm bollard luminaire in graphite RAL 7016. Its body is hot-dip galvanised steel and the milky PMMA diffuser partly shields the exposed light from above. This is the 212GR0010 variant from the Halmstad range, intended for private grounds and public zones.
Light source and control
The fitting uses an E27 lampholder and a replaceable E27 LED source that can be replaced by the end user. The manufacturer states 5.9 W for both source and luminaire, 806 lm source flux, 2700 K and CRI 80. Phase-cut control is specified for trailing-edge or leading-edge operation, so the control equipment must be compatible.
Mounting and construction
Installation uses three 9 mm holes arranged at 120° on a 65 mm diameter. Connection terminals accept conductors up to 3 × 2.5 mm², while the round sheathed cable may be up to 12.5 mm in diameter. A silicone gasket forms part of the construction. Both net and gross weight are 4.85 kg; compare the mounting pattern with the prepared base before choosing the fitting.
Outdoor placement
IP65 protection and IK10 mechanical resistance support exterior use. The light is exposed but partly screened from above, and the BUG rating is B0-U3-G1. The bollard can be considered for paths, a driveway, terrace, garden, hotel or restaurant surroundings when its 26 cm height suits the lighting layout.
Add your comment about NORLYS Halmstad 212GR graphite RAL 7016 bollard light E27 26 cm