NORLYS Nora 2468GR Graphite LED Outdoor Wall Light 2700 K DALI2

NORLYS Nora 2468GR is a compact outdoor LED wall light with a solid square front and glazing directed upwards and downwards. Its cast-aluminium body is powder-coated in graphite RAL 7016. Satin-finished safety glass covers the light sources while keeping the front face visually closed rather than turning it into a broad luminous panel.

Two-way light for architectural walls

Two LED modules produce diffused light in opposite directions. This arrangement is intended for illuminating wall surfaces, façades and other architectural elements. When choosing its position, consider the wall above and below the fitting as well as the space occupied by the body. On a terrace or balcony wall, the small square housing provides a restrained geometric element rather than an extended decorative arm.

The 2700 K colour temperature gives warm-white light. The complete luminaire delivers 455 lm while consuming 10.3 W; that output is not a separate figure for each module. For a larger wall, plan around the total output and the two-way distribution rather than relying on the number of light sources alone.

A 13 cm square housing

The body measures 13 × 13 × 5 cm. Compare its outline with the available wall section and cable outlet before installation. Straight edges, a flat front and the absence of ornamental arms suit modern, minimalist and Scandinavian design schemes. Graphite RAL 7016 identifies this particular finish; it should not be confused with the black variant or a patinated surface.

Controls and installation planning

The 2468 version includes electronic DALI2/TD control gear and uses a 220–240 V mains supply. Plan the control arrangement with the installer. The manufacturer confirms IP65 and IK09 ratings, while Class I construction requires provision for a protective-earth connection.

Mounting uses two 5 mm holes with 63 × 112 mm spacing. The installation instructions state that fixing plugs are not supplied. Installation and replacement of the LED modules or control gear require a qualified professional: this is not a fitting designed for routine replacement of a conventional bulb by the user.