Sandvik Down 1740GB is an outdoor wall light shaped as a plain block, 13.5 × 8 cm on its face and projecting 11 cm from the wall. The body is cast aluminium, powder-coated in beige grey – a warm, muted grey. Light leaves only from the underside, through a round window of clear safety glass, and the whole fitting weighs 1.05 kg.
Where the light falls
The light distribution is one-sided: a 25° beam points straight down. ULOR 0% and a BUG rating of B0-U0-G0 mean nothing shines upwards or sideways, so a narrow, sharply cut stripe of light forms on the wall below the fitting while the wall above stays in shadow. That marks a front door, a house number or a pillar; lighting a driveway evenly would need a different fitting.
Which lamp you need to buy
Inside is a GU10 socket for an LED PAR16 lamp of up to 4 W. No lamp is included, so brightness and light colour come from the lamp you choose, and the user changes it without calling an electrician. If you prefer a complete set, the same family has index 1741 supplied with a lamp: 3.9 W, 2700 K, 210 lm, dimmable.
Mounting and power
The light is screwed to the wall through two ø4.5 mm holes spaced 37 × 80 mm apart. The 131XX0009 corner bracket, needed for mounting on a building corner, is sold separately. It is protection class I, so the installation must provide a protective earth. The terminals take conductors up to 3 × 2.5 mm², and further lights can be looped on with cable up to 3 × 1.5 mm² – several lights along a facade can run from one supply line. The EPDM gland seals a round cable 7–10.5 mm in diameter.
IP65 lets the light hang on an open wall with no canopy, and IK08 means resistance to an impact of 5 J. The maker gives an operating range of -20 to +45 °C, describes the design as classic and intends the light for house facades and public areas.