Nowodvorski EYE L 5471 white surface-mounted ceiling light, 40 cm, GU10

Nowodvorski EYE L 5471 is a white surface-mounted ceiling light with an elongated cylindrical body made from painted steel. It measures 40 cm high and 5.5 cm wide, with one light source positioned at the lower opening. This is the P004 RAL 9003 white version from the EYE family, rather than a short ceiling fitting or a cable-suspended pendant.

Allow for the full 40 cm projection

The narrow cylinder takes up little horizontal space, but its body extends well below the ceiling. Measure the remaining clearance before choosing its position, particularly in a hallway, corridor or beside tall cabinetry. Direct surface mounting means that the fitting attaches to its supporting surface; the stated height is not an adjustable suspension length.

It can be planned as a single lighting point or repeated using several separate fittings in a living room, bedroom, kitchen or dining area. Choose their spacing and number around the room and the selected bulbs, rather than assuming that one tube will provide complete general illumination.

Choose a separate GU10 LED bulb

The fitting takes one replaceable GU10 R50 LED bulb, rated at no more than 10 W. A bulb is not included. The 10 W figure is the permitted source limit, not the consumption of a supplied lighting package or a statement of brightness. Colour temperature, lumen output and beam angle depend on the bulb you choose, so compare those details before ordering.

A replaceable source means that the bulb can subsequently be changed while keeping the steel fitting. Any replacement must retain the correct cap type and stay within the maximum wattage.

Simple geometry, fixed electrical connection

The smooth white tube suits modern, minimalist and Scandinavian interiors where repeated clean lines are preferred to decorative arms or broad shades. It is designed for indoor use. Connection to the ~220–230 V supply should be carried out by a qualified installer following the manufacturer's instructions. The package contains the fitting and installation and user documentation; the required LED bulb must be obtained separately.