RENDL KELLY LED POLO R12637 semi-recessed ceiling spotlight white 12 W 3000 K 24°

RENDL KELLY LED POLO R12637 is a white ceiling spotlight with a semi-recessed base and a round head held in a visible bracket. Its integrated LED and movable head let you direct light towards a selected part of the interior rather than only straight down beneath the fitting.

A recessed base with an exposed spotlight head

This version is intended exclusively for installation in a plasterboard ceiling. It is not an ordinary surface-mounted spotlight that attaches entirely to the ceiling face: it needs a mounting hole measuring 6.5 cm in diameter and a recess depth of 5 cm. Check the space above the board and the position of other services before choosing its location.

The visible section is 14.5 cm high, while the head measures 13.7 cm in diameter. The spotlight remains below the ceiling plane, so it does not create the appearance of a flat recessed downlight. Its white finish, open bracket and straightforward geometry suit modern and modernist interiors in which the construction of the fitting can remain visible.

A narrow beam with adjustable direction

The 24° beam angle concentrates light on a selected area. A tilt range of 160° and rotation of 350° allow the head to be aimed towards a wall, picture or another detail. When planning several fittings, consider each spotlight's position and distance from the illuminated surface. An adjustable head does not replace a suitable lighting layout.

The 12 W LED provides 600 lm and warm light at 3000 K. These figures help when selecting accent lighting for living rooms, bedrooms, dining areas or hotel and restaurant interiors; they are not a promise that one spotlight will illuminate an entire room evenly.

Integrated LED and TRIAC dimming

The LED source is built in and the power supply is included, so there is no separate bulb to select. The fitting operates at 230 V and supports TRIAC dimming; its controls must be compatible with that dimming method. Installation must be carried out by a qualified installer with the power disconnected. The manual also calls for careful handling of the fragile optical part.