Stucchi EVO surface/suspended lighting track black 2 m 9500-2/B-ST1-E

9500-2/B-ST1-E is a two-metre length of black lighting track for the A.A.G. Stucchi EVO system, in the ST1 profile for surface or suspended mounting. The outer profile is extruded aluminium, the inner insulating body is PVC, and the four conductors are copper.

Dimensions and installation

The track section is 26.2 mm wide and 21 mm high, and the slot underneath, where adapters clip in, is 16.5 mm. The length is 2000 mm and it weighs 1397.3 g. The track is screwed straight to the ceiling or hung on wires; the manufacturer gives a maximum load of 25 kg per metre and refers to the installation instructions for details.

Power supply

The track's rated current and voltage are 15 A and 60 V DC, and the EVO system runs on 48 V DC from a driver that converts 230 V AC mains to safety extra-low voltage. That means only EVO-family adapters and luminaires fit this track — fittings with a 230 V adapter will not connect to it. The driver is not included and is chosen to match the total wattage of the luminaires on the run.

What you need to buy separately

Only the track length is supplied. The ends are closed with an end cap with a locking screw: metal 9504/ST1-B or polycarbonate 9504/ST1-P-B. The unused part of the slot can be covered with the black PMMA masking strip S-9500/SE-B-3000 or the opal screen S-9500/SE-OPN-3000 — both are 3 m long and snap into the track. The ST1 profile also comes in 350, 500, 1000 and 3000 mm lengths and in white.