The LVM DUST COVER 1M is a black PMMA strip 100 cm long, made for the single-circuit 48 V low-voltage LVM magnetic track system. The manufacturer calls it a dust cover and files it among the parts of that system's surface-mounted version.
What it fits and how it goes in
The part is tied to the LVM system alone β the manufacturer gives the mounting method as "for the LVM system", so it does not fit other makers' track or other Nowodvorski ranges. That is the first thing to check before ordering: the track profile has to come from the same family.
In the system's installation manual the manufacturer states that every LVM component works on a push-fit principle. The strip therefore seats into the track without screws and without tools, and taking it out again does not mean dismantling the whole run.
In the LVM system manual the manufacturer lists one- and two-metre track sections, straight, angled, T and X connectors, the end cap with the supply, the LVM driver and suspensions for pendant mounting. The dust cover adds to that set rather than replacing any part of it.
Which length and colour to order
The cover comes in two lengths, 100 and 200 cm, and those are exactly the lengths in which the manufacturer sells the LVM track itself. One piece of cover matches one piece of track, and a longer run is closed with several pieces.
Two colour versions exist: black, which is this one, and white. Pick the colour to match the track, because the strip sits in its profile along the whole length and an odd shade shows from the other end of the room.
The manufacturer specifies this part for indoor use only.
Add your comment about Track accessory LVM DUST COVER 1M 12325 Nowodvorski