White triple recessed fitting V-TAC VT-441 3×GU10 max. 35 W IP20

V-TAC VT-441, order code 10299, is a white rectangular recessed fitting for three replaceable GU10 lamps. Its 261 × 88 × 30 mm body arranges three points in a straight line, while individually tilting rings direct their beams towards selected parts of a dry interior.

Three independently adjustable GU10 points

Each of the three holders accepts a standard GU10 lamp and sits within a movable inner ring. The producer states a maximum light-source wattage of 35 W. Bulbs are not supplied, leaving output, colour temperature, beam angle and possible dimming to the separately selected GU10 models. The fitting has no integrated LED module and does not impose a fixed light colour. Its three-source layout can accent a worktop, wall, display or a defined section of a circulation route.

Dimensions of 261 × 88 × 30 mm

The visible rectangular frame is 261 mm long and 88 mm wide, with an overall depth of 30 mm. Installation requires a rectangular cut-out measuring 245 × 75 mm. Space for the housing, bulbs, wiring and safe heat dissipation must be confirmed before cutting the ceiling. The fitting weighs 0.26 kg. Its white finish combines an iron body with PC components, forming a restrained border around all three separately positioned light sources.

Recessed installation in a dry interior

Spring clips retain the fitting from the back of the ceiling board. The model runs from 220–240 V at 50 Hz. An IP20 rating provides protection against finger access but none against water, so it belongs in a dry indoor location rather than a zone requiring elevated ingress protection. The producer lists an operating range from -20 to +45°C and also states that the fitting is not suitable for extreme conditions. Installation space should remain compatible with the selected bulbs.

Current warranty and package contents

The producer's current record specifies a two-year warranty. Declared conformity covers CE, EMC and RoHS. The package contains one triple recessed fitting; all three GU10 light sources must be purchased separately. Mounting and mains connection should be undertaken with power isolated, after confirming the opening and available ceiling void. Because the bulbs remain replaceable, output, light colour and beam distribution can later be changed without removing and replacing the complete rectangular frame.