VASAGLE LBC32X Bar Stools, Set of 2, Rustic Brown and Black, 65 cm

VASAGLE LBC32X is a pair of backless bar stools with round rustic-brown seats and black steel frames. The seats are made from particleboard rather than solid timber. Four legs are linked by crossbars, leaving the frame open while providing a place to rest your feet.

Check the counter against the 65 cm seat height

Each stool is 65 cm high, with a seat diameter of 32 cm. Before choosing a position, compare those measurements with the underside of your counter and the available space along its edge. At an ordinary dining table around 75 cm high, the height difference will be much smaller than at a raised kitchen counter.

Because there is no backrest, the whole stool can slide beneath a sufficiently high worktop. Table legs and cross rails can still obstruct it, so check the actual clear space rather than relying only on the height of the top surface. Allow room for two people as well as space to pull the stools out when sitting down.

Hard seats, footrests and individual load limits

The steel crossbars act as footrests when you sit at a higher surface. These are unupholstered seats without back or arm support, an important distinction if you are comparing them with chairs for long periods of desk work. The brown finish supplies a wood-grain appearance, but the seat material remains particleboard.

The manufacturer specifies a maximum static load of 150 kg per stool. That figure applies separately to each seat; it is not a combined allowance shared between the two.

What comes in the set

The package contains two stools, an assembly kit and instructions. Assembly is required, and the tables shown in room photographs are not included. Matte black steel, brown wood-effect seats and exposed frames give the pair an industrial or loft character. Use the measured seat height to choose a compatible kitchen counter or raised dining table rather than assuming that every bar-height surface will suit them.