Bergmen Neon Flex HXR One green power-feed cap with straight cable exit

This green Bergmen cap fits the end of Neon Flex HXR One where the power feed is installed. Variant 01-011-020-132 has a straight cable exit, rather than a side or bottom exit. It is an accessory for making the connection, not a complete LED neon strip or a standalone light.

Match the cap to the cable route

Check the Neon Flex family and the planned cable direction before ordering. The opening allows the cable to pass through, so this cap serves a different purpose from the closed end cap used at the non-powered end. Green and the straight exit identify this particular version. A similar-looking end fitting does not establish compatibility with another system.

Sealing is part of installation

Bergmen makes the IP67 seal conditional on additional silicone adhesive. The HXR One manual instructs the installer to fill the cap with silicone, slide it onto the end and check that all gaps have been filled. Remove excess silicone and allow the joint to dry. This is not an IP67 claim for a loose cap fitted without the required sealing.

An end sealed in this way allows the system to be used outdoors in accordance with Bergmen's instructions. Disconnect the power before working on the connection. The manual requires installation by a suitably qualified person.