CustomForm TRISO 11 LP012TRISO11-02 is a black pendant fitting with eleven exposed E27 lamp holders. Three irregular groups of arms branch from the vertical stem at different heights. Once lamps are fitted, this produces a wide three-dimensional arrangement rather than concentrating the light in one point.
Eleven replaceable light sources
Each holder accepts one E27 bulb rated up to 60 W, and bulbs are not included. This leaves colour temperature, output and bulb shape to be selected for the installation. With eleven points, using one matching set helps prevent differences in light colour and an uneven appearance between the arms.
The TRISO collection structure
The black metal frame uses straight sections with holders pointing horizontally, diagonally and vertically. CustomForm’s official catalogue identifies this exact TRISO 11 arrangement as the largest member shown alongside the 2, 4 and 6 versions. The exposed bulbs remain part of the design, so their length and diameter need to be considered before purchase.
Scale and position
The product’s catalogue data lists an approximate length of 93 cm, width of 57 cm and height of 113 cm. This span needs clear space around the arms and sufficient clearance below. The adjustable suspension allows the fitting’s position to be set above a table or at the centre of a room.
Preparing for installation
Before installation, check the load-bearing ceiling point, electrical supply and room to unfold every arm safely. Fit the bulbs only after the structure has been stabilised. Because there are no shades between the lamps and the viewer, the chosen wattage and luminance will have a direct effect on visual comfort.
- eleven E27 holders; bulbs purchased separately
- maximum 60 W per light source
- black metal with adjustable suspension
- manufacturer code LP012TRISO11-02
Add your comment about Black CustomForm TRISO 11 pendant light for 11 E27 bulbs