Astrid 2205BL is a low NORLYS bollard light, 55 cm tall, with a square 14 x 14 cm cross-section and rounded corners. The body is an extruded aluminium profile with vertical ribs, powder-coated in black RAL 9005. Light leaves through an opal PMMA diffuser, and the LED module and driver are built in, so no bulb has to be bought.
How much light and what kind
The Osram LED module draws 8.2 W and produces 1501 lm; the complete luminaire, drawing 10.6 W, emits 192 lm. The opal diffuser and ribbed housing spread the light sideways, so the bollard does not dazzle, and its output is enough to mark a path, the edge of a terrace or a driveway entrance – not to light a whole garden.
3000 K is a warm white, Ra 80 gives the colour rendering of plants and paving typical for outdoor lighting, and SDCM3 means several bollards side by side glow in the same shade.
Dimming
The luminaire is phase-dimmable: Norlys allows trailing-edge (TE) and leading-edge (LE) dimmers and names a TRIAC dimmer as the external control. No separate control bus is needed; a phase dimmer in the circuit feeding the bollards is enough.
Installation and connection
The bollard is screwed down through its base with three bolts – the ø9 mm holes sit on a ø65 mm circle at 120° intervals. Ground fixings are not included: Norlys sells the mounting adapter 3080GA0009, the concrete-in element 205ZX0010, the ground-spike element 206GA0010 and the concrete foundation adapter 206GA0S10 separately, so the fixing is chosen to suit the ground before installation.
The terminals take conductors up to 3 x 2.5 mm², and further bollards can be looped from one to the next. The round cable may be up to 12.5 mm in diameter. This is a protection class I luminaire, so it must be connected to an earth conductor. Norlys allows up to 46 units on one B 10 A circuit breaker and up to 75 on a B 16 A.
Durability, lifetime and service
IP65 means a dust-tight housing protected against water jets, so the bollard stands outdoors without shelter, and IK10 is the highest impact resistance on that scale. Norlys rates the LED module at more than 70,000 h (L80B50) and the driver at 100,000 h, and offers the service kit ZN2205xx0009 as a spare part.