Hellvik 2406AL is a NORLYS bollard light shaped as an open rectangular frame, 55 cm tall. The body is powder-coated cast aluminium in light grey RAL 9006, and the diffuser is clear, textured, UV-stabilised polycarbonate. The Philips LED module and the DALI2 driver are built in, so the bollard needs no separate light source.
Dimensions and installation
The frame is 42 cm wide, 11 cm deep and 55 cm high, and weighs 7.94 kg. Fixings are included: four zinc-plated L-type threaded rods M6 × 150 × 75 with stainless-steel nuts and washers. Norlys sells ground anchor 209GA0009 and concrete-foundation adapter 209GA0S09 separately, for setting it straight into the soil or onto a foundation.
The terminals take conductors up to 5 × 2.5 mm² and allow the supply to be looped on to the next bollard; the cable entry fits a round cable up to 12.5 mm in diameter. The luminaire is protection class I, so it has to be connected to a protective earth. The manufacturer also approves it for emergency installations fed with DC 176–276 V.
How much light, and what kind
The Philips Fortimo FastFlex module is rated 9.9 W and 1691 lm, while the whole luminaire draws 11.9 W and delivers 1537 lm (129.2 lm/W) — almost twice an old 60 W bulb. The light is diffused and shielded from above; 3% of the flux goes upwards, and the BUG rating is B1-U2-G1. 3000 K is warm white, and CRI 70 is enough to light a path, although plants and facades look less true to colour under it than under Ra 80–90. The energy efficiency class is D.
Control is by DALI2: the bollard can be dimmed and switched in groups from a DALI installation, which it has to be wired into. The LED module and driver are replaced by a professional service; Norlys lists module 4699100402, driver 4699210400 and repair kit ZS2406zx0009 as spare parts. The module is rated for more than 100,000 h (L90B10), about 91 years at 3 hours a day, and the driver for 100,000 h.
Durability and where it fits
IP65 means dust-tight and protected against water jets, and IK08 means impact resistance up to 5 J. Norlys intends the bollard for gardens, private grounds and other architectural uses — beside a path, a terrace or a driveway. The plain frame without ornament is a modern, minimalist form.