The NORLYS Molde 1904AL is a 50 cm bollard light with a body of cast aluminium powder-coated light grey (RAL 9006). The plain 11 cm column bends forward at the top into a head, making the fitting 16.5 cm deep. The head holds a diffuser of clear, textured polycarbonate, UV-stabilised.
What light it gives and where it goes
The integrated Lumens LED module runs directly on 230 V, draws 8 W and produces 772 lm; 438 lm leaves the luminaire. That is about as much light as an old 40 W bulb — enough to mark a path, an entrance or the edge of a terrace, not to light a whole garden. The manufacturer intends it for private grounds and park areas.
The light is diffused and shielded from above: only 2 % of the flux goes into the sky (ULOR); its BUG rating, B0-U1-G0, means minimal backlight, uplight and glare. At 4000 K the light is neutral white, colour rendering is CRI 80, and the SDCM3 tolerance means several bollards in a row glow in the same shade.
Control and servicing
The light can be dimmed with an ordinary phase dimmer, trailing edge or leading edge. The LED module is not user-replaceable — a professional service changes it — and Norlys offers the ZS1904zx0009 service kit as a spare part. The light source carries energy class E.
Installation and wiring
The bollard is bolted down through four ø7 mm holes on an 18 × 50 mm pattern. Fixings are sold separately, to suit the ground: the 1907ZX0009 concrete-in anchor, the 1908GA0009 ground anchor, the 1909GA0010 adapter for a concrete foundation, or one of the 3090GA0009, 3081XX0009 and 1906ZX0009 mounting adapters.
The terminals take conductors up to 3 × 2.5 mm², with loop-through up to 3 × 1.5 mm², so further bollards can be fed from one circuit. The cable entry takes round cable up to 10.5 mm in diameter. As a class I luminaire it needs a protective earth conductor. The inrush current is 35 mA for 60 ms.
The IP54 rating protects against dust and water splashed from any direction, and impact resistance is IK07. The Molde 1904 model is also made in graphite.