NORLYS Oslo 2014BL is a double pole-top head for a garden lantern, made to slip onto a pole 50 mm in diameter. Two arms curve out of the central sleeve like shepherd's crooks, and each carries a shade with a wide flat brim and three rings beneath it, under which the clear lamp cover is visible. The 2014BL version is finished in black powder coating, RAL 9005.
Size and mounting on the pole
According to the manufacturer's drawing the head is 78 cm wide, 28.5 cm deep and 32 cm high. Compare the width with the space beside the path or driveway, because both shades reach well out to the sides of the pole. The fitting weighs 6 kg and is designed for a telescopic lighting pole of ø50 mm, which is not included. Norlys also sells this head as the Oslo 242 set with pole 3009 or 3011, in which case the whole lantern adjusts in height between 170 and 230 cm.
The supply cable goes into terminals that take conductors up to 2 × 2.5 mm². The fitting is protection class II, so it needs no earth conductor, and it runs on 220–240 V.
What light it gives and what to buy with it
Each of the two shades has an E27 lampholder for an A55–A60 shaped LED lamp of up to 9 W. Lamps are not included, so you need to buy two and choose their colour and brightness yourself; they are changed without a service call.
The light is open and only partly shielded from above: the brim and rings send most of it down and to the sides. A ULOR of 9.2 % means that only a small share of the luminous flux goes above the level of the fitting, which matters wherever upward light has to be limited.
Where it can stand
IP55 means protection against dust and water jets, so the head can work outdoors without any cover, at temperatures from −20 to +45 °C. The body is powder-coated steel, and the lamp covers are clear UV-stabilised polycarbonate, which stands up to direct sunlight. The manufacturer intends the Oslo series for gardens, parks and other spaces around buildings. A damaged cover can be replaced with the Norlys shade service kit 06240003.