Zambelis E361 is a round inground LED light for recessing into the ground outdoors, with a stainless steel ring and a glass cover. Under the glass sits a reflector whose light angle can be adjusted inside the fitting, so the beam can be aimed at a wall, a tree or a façade feature without tilting the whole light.
Dimensions and installation in the ground
The visible ring is 18 cm in diameter and the body is 16 cm high. The light is set into a mounting box 17 cm in diameter and 17 cm high, and the manufacturer specifies a required installation depth of 17 cm – check this figure before digging the hole in paving or a lawn. The fitting has a 50 cm cable available.
It runs on 220–240 V mains and is protection class I, so it must be connected to a protective earth conductor. Outdoor wiring should be installed by an electrician.
What light it gives
The built-in LED module draws 15 W and delivers 1200 lm in a 45° beam. This is a focused beam that suits uplighting tree trunks, columns, walls and façades rather than evenly lighting a whole terrace. 3000 K is a warm white, and CRI 80 is the standard for outdoor lighting. The light is not dimmable.
The LED source is built in and no bulbs need to be bought. The manufacturer states an L70/B50 lifetime of 30,000 hours and colour consistency of SDCM below 6. The energy efficiency class is F.
Resistance to outdoor conditions
The IP67 rating means the fitting is fully dust-tight and withstands temporary immersion, which matters in the ground, where water can stand after rain. The IK08 impact rating protects the glass against accidental knocks. The body combines aluminium, stainless steel and glass. The light suits gardens, driveways and entrances to hotels or other buildings.
Add your comment about Inground recessed LED light Zambelis E361 15W 3000K IP67 stainless steel