The Asker Pole Pro 1369AL is a single-segment lighting pole 2.36 m high with an LED luminaire built into its horizontal arm. The extruded aluminium profile is 11 cm wide, the arm projects 39 cm, and the whole pole is powder-coated in light grey RAL 9006. It stands on a base plate 24 cm square.
How much light it gives and how it spreads
Under the arm a Philips Fortimo FastFlex module works behind a sealed lens of clear PMMA. The Ledil T2-L lens has an IESNA type III distribution — elongated and thrown sideways from the pole, laying a band of light along the path or pavement the pole stands beside. The luminaire delivers 1130 lm of warm white 3000 K light at 8.6 W. 0.87 % of the flux goes upwards (BUG rating B1-U2-G1), so the light lands on the ground rather than in the sky.
DALI-2 control
The DALI outdoor driver supports DALI2 / NightDim control. It leaves the factory programmed for maximum current, so without any configuration the pole runs at full output. Dimming and schedules need a DALI installation with a controller and a control line — an ordinary phase dimmer will not work here.
Foundation and connection
The base plate has four ø12 mm holes at 200 × 200 mm. The ground anchor 117GA0009 and the concreting anchor 116ZX0009 are not included; Norlys sells them separately.258 m². The pole weighs 11 kg.
The terminals take five conductors up to 4 mm² and further poles can be looped through with up to 5 × 4 mm². The gland accepts round cable up to 12.5 mm in diameter. This is a protection class I luminaire, so the circuit needs a protective earth conductor.
Durability, service and use
IP65 means dust-tight and protected against water jets, and IK06 means resistance to a 1 J impact. The operating temperature range is −20 to +45 °C. The module and driver are replaced only by a professional service.
Norlys intends the Asker Pole Pro for private grounds, parks and other architectural schemes — it suits gardens, hotel and restaurant grounds, and parks. The plain, square-edged profile without ornament is a modern and modernist form.