Trysil 1048CS is a single-arm lighting pole 263 cm high: the square column bends at the top into a short arm, at the end of which sits a flat head with a downward-facing diffuser. The pole is made of an extruded aluminium profile, powder-coated in a corten colour close to RAL 8011 – a rust-toned paint on aluminium, not corten steel.
Dimensions and installation
The arm holds the head 71 cm out from the pole axis, and the head is 24 cm deep. The pole stands on an 18 cm base plate and weighs 17.2 kg; it ships in a 44 × 38 × 232 cm box. It is installed according to the supplied instructions, and any other accessories are ordered separately. The terminals take conductors up to 3 × 4 mm² and allow looping through to further poles with up to 3 × 2.5 mm²; the supply cable can be up to 12.5 mm in diameter.
How much light, and what kind
Two Cree LED modules work in the head. The modules themselves produce 1988 lm, and 1260 lm leaves the clear structured polycarbonate diffuser at 12.5 W, or 100.8 lm/W. The structure spreads the light symmetrically downwards onto the path or driveway beneath the arm. 3000 K is warm white light, and CRI 80 renders the colours of plants and paving naturally. A ULOR of 0 % and a B1-U1-G0 BUG rating mean the luminaire sends no light into the sky and causes little sideways glare. The manufacturer intends the pole for private grounds and other architectural schemes.
Dimming, power and lifetime
The pole can be dimmed by phase control with a Trailing Edge or Leading Edge dimmer, without a separate control line. Protection class I requires a protective earth connection, and the inrush current is only 2 A.
IP65 and IK10 impact resistance allow open-air operation. The LED modules keep 80 % of their luminous flux after 102,000 hours (L80). Modules and driver are replaced by a professional service using repair kit ZS1048zx0009. To order, Norlys also makes a protection class II version, a 2700 K version, one with a different luminous flux or one in another RAL colour.