Lillehammer DC1585AL Light Grey Outdoor Wall Sconce by NORLYS

NORLYS Lillehammer DC1585AL is an outdoor wall light with an aluminium body in light grey RAL 9006. Its upright rectangular housing has plain sides and glazing at the top. The defining feature of this version is its distribution: a narrow beam travels upwards only, rather than spreading light around the body.

A focused accent on the wall

The 4° beam is intended to pick out wall surfaces and architectural details. On a façade beside a terrace or balcony, it creates a vertical accent rather than broad illumination across the floor. It should not be treated as a substitute for lighting designed to cover a walkway. When choosing its position, consider the wall above the fitting and the architectural features that will receive the upward beam.

The integrated LED module uses 3.6 W and produces warm-white light at 3000 K. Output from the complete luminaire is 16 lm. The manufacturer's separate figure of 532 lm describes the light source itself, not the light leaving the assembled fitting. These figures are not interchangeable; the narrow optics also determine the pattern projected onto the wall.

Plan the external power supply

This is a DC 24 V version, not a fitting for direct connection to 230 V mains. It requires an external constant-voltage power supply. The LED module supports dimming, while external control is selected according to the installation design. Decide on the supply and control arrangement before mounting the light rather than assuming a standard mains connection.

Construction and wall mounting

The housing is powder-coated cast aluminium, with optical safety glass over the light opening. A silicone gasket and EPDM cable gland form part of the construction, which carries IP65 and IK08 ratings. Its unadorned outline suits modern, minimalist and Scandinavian architecture.

Dimensions are 18.5 × 11 × 8 cm. Mounting uses two 5 mm holes on 45 × 130 mm centres. Installation must follow the manufacturer's instructions. The LED module can be replaced by a professional service technician; it is not a conventional screw-in bulb.