The black SLV EUTRAC longitudinal connector with feed-in (item no. 145660) joins two sections of 3-phase track in a straight line and at the same time lets you bring mains power into the track at the joint. The housing is made of plastic and measures 19.2 cm in length, 3.6 cm in width and 3.2 cm in height.
Use and mounting
The connector belongs to the 3-phase Eurostandard EUTRAC system, so it only makes sense together with track from that system. The manufacturer specifies surface mounting. Because the connector is straight and does not change the direction of the track, it suits runs that should continue in a single line and where the power feed should sit at the joint rather than at the end of the track. When planning the layout, add its 19.2 cm to the total length of the run. If the track needs to turn a corner, a different connector type is required, for example a corner or T connector.
According to the datasheet, the connector operates at 220–240 V, 50/60 Hz, is safety class I and has protection rating IP20, which means it is intended for dry indoor spaces. Net weight is 0.153 kg and gross weight 0.164 kg, so it adds very little load to the track.
Appearance
The manufacturer photograph shows a black, elongated body: a taller box-shaped housing with the embossed EUTRAC lettering sits in the middle, and narrower plug-in sections with visible metal contacts and small screws extend from both ends. There are no decorative details; the form is purely technical and is meant to recede behind the track. On a black EUTRAC track the connector blends in by colour, while on track in another colour it will show as a dark section, which is worth considering when choosing the finish for the whole installation.