Lucide PUNCH white 2-light GU10 ceiling spotlight 13958/02/31

Lucide PUNCH 13958/02/31 is a white ceiling spotlight with two cylindrical heads on an elongated ceiling plate. Its metal body has a matt powder-coated finish. This version takes two replaceable GU10 bulbs rather than a built-in LED module.

Direct each head towards a different area

The heads rotate and tilt, so their beams do not have to illuminate the same part of the room. One can face a picture while the other points towards a reading corner; both uses are identified by the manufacturer. When choosing the mounting position, consider where those objects or seating areas are located. The adjustment changes the direction of the light, not the fixture's height.

This makes PUNCH an option for directed lighting in a living room, bedroom or study. It can also provide local lighting in a hallway, kitchen or dining room. Actual brightness and beam width depend on the bulbs you select, so the two sockets alone do not establish whether it will light an entire room sufficiently.

Choose the bulbs and controls separately

No bulbs are supplied. You need two GU10 sources in the MR16 format, each rated at no more than 35 W; the manufacturer supports LED bulbs. Your choice determines the light colour and luminous flux. The fitting itself has no adjustable colour temperature and should not be confused with a complete CCT light.

Dimming requires dimmable bulbs and a compatible external dimmer, which is also not included. Check that those components work together before planning dimming control. Otherwise, the fixture is operated with a light switch.

Size and understated shape

The manufacturer gives overall dimensions of 26.5 × 14 × 9.5 cm. The ceiling plate measures 26 × 10 × 2.5 cm, and the heads are 6.5 cm in diameter. Compare these measurements with the available ceiling space. White cylindrical heads and a rounded base suit modern, minimalist interiors without introducing a decorative shade.

This is an indoor, mains-connected fixture. Its Class I construction requires an earth connection, and installation should be carried out by an electrician. Disconnect the power before changing bulbs and allow hot lamps to cool before handling them.