Lumifall Alcazar 142.WW white double recessed downlight, 2 × AR111 G53

Lumifall Alcazar 142.WW is a white recessed fitting with two circular reflector positions inside a single rectangular frame. Its aluminium construction has a semi-matt finish and white inner rings, keeping the visible face consistent in colour. This is a fitting for replaceable lamps, not a luminaire with an integrated LED module.

Allow for both the frame and the ceiling opening

The visible face measures 355 × 180 mm, while the required cut-out is 325 × 150 mm. These measurements serve different purposes: the larger frame remains visible from the room, and the smaller opening receives the recessed part. Compare both dimensions with the planned ceiling before buying rather than using the outer frame as the cutting template.

The manufacturer's installation drawing specifies at least 110 mm of space above the face of the fitting. Spring clips provide the mounting arrangement, and the inner rings are removable. This is therefore a recessed installation, not an alternative to a surface-mounted light fixed directly onto the ceiling.

Choose the lamps before planning the light

Light sources are not included. The manufacturer specifies two AR111/QR111 lamps rated up to 75 W each, or LED reflectors, and lists two G53 connectors. GU10 is an optional configuration. Select the lamps and associated equipment for the version actually ordered; the two bases should not be treated as interchangeable.

The fitting permits 360° horizontal rotation and an inclination of up to 35°. This allows the light to be directed away from straight down, but brightness, colour temperature and beam width depend on the chosen reflectors. Dimming compatibility also needs to be checked for the lamps and their associated equipment.

A restrained two-light layout

The rectangular frame places two light points together in one ceiling opening. Its white finish and unadorned outlines suit modern and minimalist living rooms, bedrooms, kitchens or corridors. General or accent lighting can be planned through the choice of reflectors; the fitting alone does not determine the finished lighting effect.