AGO is an aluminium LED profile with a triangular 19.5 × 19.5 mm cross-section, 1 m long, in the raw version — neither anodised nor lacquered. The shape is cut so that the profile seats in an internal corner and directs the beam at a 45° angle.
What you get and what has to be bought separately
This item is the profile alone. The polycarbonate COMPACT cover (transparent, frosted or milky), the end caps, the mounting clips and the LED strip itself are ordered separately — without a cover and a strip the profile will not light anything.
The driver does not fit inside the profile and the manufacturer places it outside, so room has to be left for it inside the furniture or in a box. The bare profile carries no declared ingress rating: sealed it reaches IP68, unsealed it stays at IP20 — how you close the channel decides.
Which strip fits and how lengths join
The channel takes an LED strip up to 12 mm wide, which covers most of the common 8 and 10 mm strips. This piece is 1 m; the manufacturer also offers the same profile in 2.02 m and 3.0 m, and as a made-to-order length of up to 6 m.
Lengths cannot be joined with a connector into one continuous line, so a longer installation is either separate pieces with a seam between them or a single longer cut ordered to size. That is worth settling before buying, because afterwards it means another order.
Where and how it is mounted
The manufacturer intends AGO for surface lighting in furniture and in interior trim, and also for suspended mounting. The profile fixes with a screw, with double-sided tape, on a dedicated clip, on a hinge or on a pendant — the method follows the surface.
The raw version is the bare face of the extruded aluminium. Where the profile stays visible, the same model is also sold anodised in silver and inox and lacquered in white and black.
Add your comment about LUMINES AGO Surface LED Profile, Raw, 1 m