Mantra BAKER 7014 white outdoor LED wall light, Ø11 cm

Mantra BAKER 7014 is a round outdoor LED wall light in a sand-white finish, RAL 9010. A horizontal edge separates its covered upper face from the lower surface where the light emerges. The construction combines aluminium and polycarbonate. Its 11 cm diameter identifies the smaller circular version, rather than one of the square or larger BAKER fittings.

A shallow fitting against the wall

The manufacturer's drawing gives a diameter of 110 mm and a depth of 22 mm. Compare these measurements with the available wall space and the position of the electrical supply before choosing the mounting point. There is no projecting arm or separate broad shade. The simple divided disc suits modern and minimalist architectural schemes without adding ornamental detailing. Article 7014 is the white version; it should not be confused with the dark-grey finish elsewhere in the collection.

Warm orientation lighting, without a separate bulb

The integrated LED source is rated at 3 W, with a colour temperature of 3000 K and a stated luminous flux of 210 lm. Manufacturer photographs show a local lighting effect towards the lower wall area. This makes the fitting a choice for orientation lighting rather than a reason to assume that one small lamp will illuminate an entire terrace or long access route. Mounting position and spacing between light points matter alongside the declared output.

No separate bulb needs to be selected. The manufacturer lists the source as non-replaceable and the fitting as non-dimmable, so brightness adjustment through a conventional dimmer should not be planned. Matching the 3000 K colour temperature when combining fittings avoids mixing different white-light tones.

Outdoor placement and connection

BAKER is specified for outdoor use with an IP54 rating. It can be used on a façade, a solid boundary wall, or a wall beside a balcony or terrace. This is a wall-mounted fitting, not a freestanding garden lamp or an underwater light. Its supply rating is 220–240 V at 50/60 Hz. As a class I fitting, it requires an electrical installation incorporating a protective earth connection.