Max Light Halo E H0129 is a black aluminium recessed spotlight with a round trim and a cylindrical lighting head. The head can be pulled out and tilted, as the official photograph of this variant shows. It is therefore not a fixed downlight restricted to pointing vertically downwards.
A ceiling cut-out rather than surface mounting
The trim is 6 cm in diameter, while the manufacturer specifies a 5.5 cm mounting hole. These measurements serve different purposes: one describes the visible trim and the other the cut-out in the ceiling. Compare both with the planned mounting position and the available space above the ceiling before making the opening.
The technical drawing marks the body height as 7 cm, the head diameter as 3.5 cm and its minimum projection as 1.5 cm. The head therefore remains visible below the trim even when retracted. Mounting springs are visible in the body photograph; this construction differs from a surface-mounted fitting positioned entirely below the ceiling.
Warm light in a concentrated beam
The integrated LED source is included; there is no conventional user-replaceable bulb. There is therefore no separate screw-base bulb to buy or bulb colour temperature to choose. Power consumption is 6 W, and 3000 K means warm white light. The colour temperature is fixed and the source cannot be dimmed.
The 36° beam angle concentrates light rather than spreading it widely. The product information sheet and EPREL register specify a useful luminous flux of 459 lm in a 90° cone and CRI 92. High colour rendering helps preserve the appearance of illuminated objects. The head position determines which part of the interior receives the beam.
A black tube from the Halo collection
Smooth aluminium, a circular trim and an undecorated tube give this fitting its modern form. It can serve as a lighting point in a corridor or living room. This is the E Black version, code H0129. Check that code when comparing Halo variants: photographs of other versions do not establish the construction of this model.