Maytoni Basic form MOD321PL-01G3 is a single-lamp pendant with a round ceiling canopy and a 20 cm spherical shade. The fitting is gold-finished metal; the shade is milky white glass. You screw an E14 lamp in from below, then seat the globe on the metal collar.
No lamp is included. Use an E14 source of at most 40 W. The luminaire has no built-in dimming.
Size and hanging height
The 20 cm globe has a small plan footprint but needs clearance beneath it. The official drawing shows a 10 cm diameter canopy 2.5 cm high and a 20 cm metal tube above the shade. Overall height is 45 cm to 180 cm, set during installation rather than with a later lever.
Net mass 0.97 kg and gross 1.4 kg help judge the ceiling load. Over a table, measure from the top to the bottom of the globe at the chosen drop: 45 cm sits low, 180 cm reaches far down in a tall room.
Lamp holder and supply
One E14 holder, 40 W maximum, 220–240 V / 50 Hz. Protection class I needs an earth conductor. IP20 limits use to dry interiors; wet zones and outdoors are out of scope.
The opal glass spreads the light instead of throwing a hard cone. Colour temperature and lumens come only from the lamp you fit — Maytoni’s sheet does not list flux or kelvin for this fitting.
Installation
The instruction shows fixing into the ceiling, connecting the conductors, fitting the E14 lamp, then sliding on the 20 cm shade. The globe goes on after the lamp. You need access to a junction box; there is no mains plug.
Where it fits and how it looks
A geometric globe and smooth gold metal suit modern and minimal interiors. One 20 cm point will not light a kitchen island on its own; it works better in a living room, bedroom or over a small dining table, or as a row of matching pendants.
The manufacturer states a 5-year warranty. Relamping means taking the shade off. Wipe glass and metal with a dry or slightly damp cloth; the sheet does not describe chemical cleaning.
Add your comment about Maytoni Basic form pendant MOD321PL-01G3 gold, 20 cm globe, E14