Maytoni Basis Grid Radity white LED track light 12 W 4000 K TR084-1-12W4K-W Promo Code - MAY20 until the end of Oct 31

Maytoni Basis Grid TR084-1-12W4K-W is a white LED luminaire for the Radity magnetic track system. Its narrow aluminium body has rounded ends and a dark grid across the light-emitting face. That divided underside gives it a different appearance from linear modules with a continuous opal cover.

A short module running along the track

At 22.2 cm long, 2.6 cm wide and 2.9 cm high, the fitting has a defined footprint to allow for in a planned track layout. The elongated body follows the line of the track rather than hanging below it on a cable. This matters when combining several modules without introducing large shades or separate pendant volumes.

The white housing contrasts with the dark grid when viewed from below. Its restrained geometry suits modern, modernist and minimalist interiors. In a living room, bedroom or dining room, it can form part of a coordinated lighting arrangement rather than being assumed to replace every other light.

Neutral white light with a 60° beam

The integrated LED source is rated at 12 W and 4000 K. This is the neutral-white version, not the warm-white 3000 K alternative in the same family. Maytoni specifies a luminous flux of 190 lm and a beam angle of 60°. Plan the number and spacing of fittings around the distance to the illuminated surface and the contribution from other lights; wattage alone does not describe the resulting brightness.

The colour rendering index is CRI 90. This particular version is not dimmable, so it does not provide adjustable brightness where that is a requirement of the lighting scheme.

Check the Radity system before ordering

This is a 48 V system module, not a universal spotlight for any single-circuit track. Check that the track, power arrangement and other components are compatible with Radity. Magnetic attachment is illustrated in the manufacturer's instructions. For a hotel, restaurant or shop installation, select it as part of the complete lighting design and establish the required quantity from the actual lighting task.