Nora 2487CS Rust-Colored LED Outdoor Wall Sconce by NORLYS

Norlys Nora 2487CS is a square outdoor wall light with a flat, closed front and a rust-brown finish. The manufacturer's Corten Steel designation describes the colour rather than the body material: the housing is powder-coated cast aluminium, with satin-finished safety glass covering the light openings.

A compact shape with two-way light

The 13 × 13 × 5 cm dimensions let you check the available wall area and clearance from neighbouring architectural features before ordering. Light leaves the top and bottom rather than the front face. Norlys specifies this diffuse distribution for lighting walls, façades and other architectural elements.

Its plain geometry supports modern, minimalist and Scandinavian-style schemes. The CS finish is a specific colour option, not a claim that the aluminium body develops a natural rust layer. For a terrace or balcony installation, choose a suitable wall surface rather than treating the fitting as a freestanding light.

Check which power setting is being compared

Two LED modules and an electronic driver are included; separate screw-in bulbs are not required. The light is neutral white at 4000 K. The current installation manual gives a factory setting of 10.9 W and 530 lm luminaire output. At the highest setting, the datasheet specifies nominally 15 W and 695 lm. These figures refer to different settings, which matters when comparing brightness with other wall lights.

The power switch is located on the driver and must only be changed with the fitting switched off. Leading-edge and trailing-edge phase dimming are supported; ask the installer to select compatible controls.

Installation and replacement

The IP65 rating depends on correct installation. Connection to the 220–240 V supply, mounting and replacement of the LED modules or driver require qualified personnel. The manual states that mounting plugs are not included. Follow its cable-entry instructions using a cable 7–10.5 mm in diameter: piercing the seal with another tool can compromise the enclosure's protection.