NORLYS Astrid 2225BL is an 85 cm LED garden bollard with a square 14 × 14 cm section and vertical ribs running the full length of the body. In the upper part, an opal PMMA diffuser shows between the ribs. The extruded aluminium body is powder-coated black, RAL 9005.
Where it goes and how it is fixed
At 85 cm the bollard lights the surface of a path, terrace or driveway without shining into the eyes at head height. It suits gardens, terraces, driveways and streets. The light weighs 6.24 kg.
The base has three ø9 mm holes set at 120° on a 65 mm circle. Fixing screws are not included; for setting it in soil or concrete Norlys sells separately the 3080 mounting adapter, the 205 anchor for concreting, the 206 ground anchor and the 206S adapter for concrete foundations. The terminals take conductors up to 3 × 2.5 mm² and allow looping through, and the gland takes a round cable up to 12.5 mm across.
How much and what kind of light
The Osram LED module shines at 3000 K, a warm white. The module alone gives 2163 lm, but after the opal diffuser and the ribs 362 lm leave the light at 14.6 W — orientation and accent lighting, not light to work by. The light is diffuse, half of the output goes upward (ULOR 50%), and the energy class is C.
It dims by phase control with an ordinary trailing-edge or leading-edge dimmer — no DALI bus. Up to 96 of these bollards can run on a B16A breaker, up to 37 on a C10A.
Build and servicing
The light is protection class I, so it needs a protective earth. IP65 lets it stand in the rain without cover, and the IK10 impact rating matters beside a driveway or pavement. The LED source and the driver are replaced by a qualified service technician; the manufacturer quotes an LED lifetime above 70,000 h (L80B50) and 100,000 h for the driver. The plain ribbed form without ornament suits modern, minimalist and Scandinavian schemes.