Norlys Vasa 452WH is a white outdoor wall light with a broad, curved aluminium front. Its lower light outlet directs diffused illumination down the wall, and both the LED module and electronic driver are included.
Diffused light directed downwards
The 452WH version produces warm white 3000 K light. No separate bulb is selected for it: the included LED module determines the light colour. The optics provide a broad downward distribution, so choose the mounting position to suit the wall surface that needs lighting.
The manufacturer specifies 939 lm for the complete fitting at a power consumption of 12.8 W. This is the light leaving the fitting, separate from the output of the LED source itself. When using several fittings along a longer façade, plan their positions around the distribution and wall layout, allowing for corners and openings.
Dimensions and white finish
The housing is 31 cm wide, 12.5 cm high and projects 15.5 cm from the wall. Compare these dimensions with the width of a pillar or the space beside an entrance. Its broad front and lack of ornament suit modern and minimalist architecture.
The body is cast aluminium, powder coated in white RAL 9003. The lower cover is transparent, structured, UV-stabilised polycarbonate, with a silicone gasket and EPDM cable gland sealing the connections. IP65 provides protection against dust and water jets when the fitting is installed in accordance with the instructions.
Controls and electrical preparation
The fitting supports DALI2/TD control, so plan the regulation method and suitable wiring before preparing the connections. The driver is housed inside the fitting and does not need to be purchased separately. A professional service technician replaces the LED module and control gear.
A qualified installer must carry out installation and connection; Class I requires a protective earth conductor. The manufacturer provides for mounting through an intermediate plate with 45 mm spacing or directly through holes spaced 68 mm apart. The connection accepts a round cable 7–10.5 mm in diameter, which should be checked before the installation is prepared.
