Vasa 127AL is an outdoor wall light shaped like a half-cylinder, cast in aluminium and powder-coated light grey in RAL 9006. A clear, textured polycarbonate diffuser lets the light out up and down the wall at the same time. A dimmable 5.9 W E27 LED lamp is included in the box.
Size and installation
The light is 31 cm wide and 12.5 cm high, projects 15.5 cm from the wall and weighs 2.45 kg. It can be fixed through an intermediate plate with two 5 × 10 mm adjustment slots 45 mm apart, or directly through two ø5 mm holes 68 mm apart – the slotted plate lets you level the fitting after drilling.
The terminals take conductors up to 3 × 2.5 mm², and the cable gland a round-sheathed cable of 7–10.5 mm diameter. The fitting can be looped through with conductors up to 3 × 1.5 mm², so several wall lights on one facade run from a single circuit. It is protection class I and must be connected to a protective earth.
Light source and effect on the wall
The box contains a Philips MASTER LEDbulb 5.9 W E27 in A60 shape at 2700 K – warm, slightly yellowish light close to a traditional incandescent bulb. The lamp itself produces 806 lm, and 384 lm leaves the luminaire. You replace the lamp yourself; a replacement must fit within A55 to A60 size.
Half of the output (ULOR 50 %) goes up and half down, and the BUG rating B0-U3-G0 confirms that almost nothing escapes sideways. The facade gets two bright bands above and below the fitting – light that picks out the wall and the entrance rather than lighting the yard. It dims on a phase dimmer, trailing-edge or leading-edge.
Durability and use
IP65 means dust-tight and protected against water jets, and IK08 an impact resistance of 5 J. The gasket is silicone, the cable gland EPDM, and the diffuser is UV-stabilised. The manufacturer gives an operating range of −20 to +45 °C.
Norlys designed the Vasa for lighting walls and facades. It also works on a balcony, a fence or the entrance of a hotel or restaurant, and the smooth, unornamented body suits modern architecture.