Vasa 5019AL is an outdoor wall light shaped like half a cylinder, with a cast aluminium body powder-coated in light grey (RAL 9006). Clear, textured, UV-stabilised polycarbonate diffusers close the top and bottom faces, so the light shines up and down at the same time.
How it lights
Inside are two Philips Fortimo Strip LED modules rated 6.6 W in total, and the whole luminaire draws 8.3 W. The modules produce 1188 lm and 668 lm leave the luminaire. Half of that light goes up (ULOR 50%) and half goes down, so the facade gets two fans of light, above and below the fitting, while a strip by the entrance or path is lit as well.
4000 K is neutral white light, with colour rendering of CRI 80. The manufacturer intends the light for walls, facades and other architectural settings. Because part of the light is aimed upwards, it is not the choice where light emitted towards the sky has to be limited.
Dimming and service
The electronic driver can be dimmed with a trailing-edge (TE) phase dimmer, so check which dimmer your installation uses before ordering. Inrush current is 1.65 A for 16.5 µs; Norlys allows up to 157 of these lights on one B10 breaker and up to 254 on a B16.
The LED modules and driver are replaced by a professional service; the manufacturer lists service kit ZS5019zx0013 for this model. Module lifetime is given as L80B20 over 72,000 h and L90B10 over 64,000 h, driver lifetime as 50,000 h.
Dimensions and installation
The light is 31 cm wide and 12.5 cm tall and projects 15.5 cm from the wall. It can be fixed through an intermediate plate with two 5 × 10 mm adjustment slots spaced 45 mm, or directly through two ø5 mm holes spaced 68 mm. It weighs 2.27 kg.
The terminals take conductors up to 3 × 2.5 mm², and further lights can be looped through with conductors up to 3 × 1.5 mm². The gland takes round cable 7–10.5 mm in diameter. The light is protection class I and needs a protective earth; IP65 and IK08 impact resistance allow mounting on a wall without a canopy.