Moss 6355GR is a NORLYS recessed light with a round graphite front in RAL 7016, 130 mm in diameter. In the middle of the front sits a reflector head that can be turned, in the vertical plane as well, protected by a clear safety-glass pane. The body is powder-coated cast aluminium, the front is powder-coated steel, and the whole light is 65 mm high.
How it is installed
According to the manufacturer's data sheet the light fits a 110 mm hole and needs a recess 85 mm deep. Two spring clips, shown on the drawing, hold it in the panel, so there are no fixing screws. The installation manual shows it fitted from below into a panel under a slab, and once installed the head tilts by ±15°, so the pool of light can be moved onto the spot you want.
A 0.3 m H05RN-F 3G1 lead comes out of the light and is connected to the mains in a suitable junction box. Norlys sells the 145ZX0009 junction box separately, so add it to the order or provide your own. The light is protection class I and needs a protective earth.
How much light it gives
The integrated LED module runs directly on 230 V, with no separate driver. It produces 439 lm, and 382 lm leaves the light at 4.2 W, i.e. 91 lm/W. 3000 K is a warm white, and CRI 80 is the colour rendering typical of general lighting. The beam is symmetrical at 36°: from 1 m it makes a pool about 0.72 m across at 284 lx, and from 2 m about 1.45 m at 71 lx. This is accent light for a piece of wall, a step or a plant, not for lighting a whole driveway.
The light is dimmed with a leading-edge (LE) or trailing-edge (TE) phase dimmer. The LED module is included but may only be replaced by a professional service. Norlys rates it at L70 59,000 hours, the time after which it still gives 70% of its initial brightness.
Where it fits
IP65 means it is dust-tight and protected against water jets, so it can work outdoors without extra cover, from −20 to +45 °C. Norlys intends it for gardens, private grounds and architectural features: it suits a house façade, a garden, or the outside of a hotel or restaurant.