Lund 290GB is an outdoor wall light with a wide, flat cone-shaped hat set on a straight arm that comes out of a round wall plate. Under the hat sits a clear dome covering the bulb. The body is hot-dip galvanised, powder-coated steel in beige grey RAL 7006.
Dimensions and mounting
The hat is 32.5 cm across, the whole light is 24 cm high and it projects 42 cm from the wall. Compare that depth with the space in front of the facade, above a door or beside a path. The wall plate is 11.5 cm in diameter and the net weight is 1.74 kg.
The light is fixed with the mounting box supplied. The terminals take conductors up to 2 x 2.5 mm², and the fitting can be looped through with conductors up to 2 x 1.5 mm², so several lights on one wall can run from a single circuit. The cable gland takes a round cable with an outer diameter of 7 to 10.5 mm. The manufacturer also provides for mounting on a building corner, which needs the corner bracket 153XX0009, sold separately.
Light source and light direction
The light has one E27 socket for an A55–A60 shaped LED bulb of up to 9 W. The bulb is not included, so you choose its colour and brightness, and changing it needs no service visit. The manufacturer allows only the A55–A60 shape, so wider globes and long candle bulbs are not intended for this fitting.
The steel hat covers the bulb from above, while the clear dome leaves it open below and to the sides. Only 12% of the light goes upwards, which means the light mainly lights the ground, steps or entrance below it, and the wall above stays darker.
Outdoors all year round
IP55 means protection against dust and water jets from any direction, so the light can hang on a facade without a canopy. The polycarbonate dome is UV-stabilised, which limits yellowing in the sun, and the cable enters through an EPDM gland. The fitting is protection class II and needs no earth conductor. If the dome is damaged, Norlys sells it as a spare part, service kit number 06240003.
Norlys describes Lund 290 as a wall light of Scandinavian design for general use. The plain hat-on-an-arm shape suits a house facade, the space above a front door and a building corner.