Voss 5034GR is an outdoor wall light shaped as a rectangular block, 16 cm wide and 18 cm high, projecting 27 cm from the wall. The body is cast aluminium powder-coated in graphite (RAL 7016), and the LED modules sit behind clear safety glass. The plain, solid form without ornament reads as modern and minimalist.
How big it is and how it is mounted
The fitting weighs 4.56 kg, so the wall and plugs have to carry a load that sits 27 cm out from the wall face — worth checking on a façade insulated with polystyrene. It is fixed through two ø7 mm holes spaced 100 × 80 mm, following the enclosed instructions.
The terminals take conductors up to 3 × 2.5 mm², and the supply cable in a round sheath should be 7 to 10.5 mm in diameter; it enters through an EPDM cable gland. Further fittings can be looped through with up to 3 × 1.5 mm². The fitting is protection class I and therefore needs a protective earth.
What light it gives
Two LED modules draw 10.1 W together, and 652 lm leave the fitting at 4000 K, a neutral white, with a colour rendering index of CRI 80. Light goes downwards only, in a wide 62° beam, and none escapes upwards (ULOR 0%). The fitting therefore lights the wall below it, the entrance and a strip of ground next to the building, not the façade above.
It is dimmable, but only with a trailing-edge (TE) dimmer, which is how the built-in Philips Xitanium TE driver works. The manufacturer does not list leading-edge dimmers.
Weather resistance and lifetime
IP54 means protection against dust and against splashing water from any direction, which is enough on a house wall exposed to rain. IK06 is moderate impact resistance. The manufacturer gives an operating range of −20 to +45 °C.
The LED modules keep 80% of their flux for 71,600 h (L80), and the driver is rated at 50,000 h. Both the modules and the driver are replaced by a professional service; Norlys offers the ZS5034zx0G10 repair kit for this.