The Paris 160BS is a small outdoor wall light shaped as a half-dome, with a steel shade in black finished with a silver patina. A satin, UV-stabilised polycarbonate diffuser closes it from below, and the light leaves only downwards.
Dimensions and mounting
According to the manufacturer's drawing the fitting is 23 cm wide and 11.5 cm high, and it projects 14 cm from the wall — a figure to compare with the space beside a door or under the eaves. It weighs 0.59 kg and is fixed with two screws through 5 × 10 mm oval holes at 90 mm spacing, so its level can be corrected without drilling again.
The terminals take conductors up to 3 × 2.5 mm², and the supply can be looped on with up to 3 × 1.5 mm²; the EPDM gland seals a round cable of 7–10.5 mm diameter. Several lights along a facade can therefore run from one line. It is a protection class I fitting, so it must be connected to an earth conductor.
Which bulb and what light
Inside is a single E27 lampholder, and no bulb is included. The manufacturer allows an LED bulb of up to 9 W in a classic A55–A60 shape — a wider globe or a long candle will not fit under the shade. You choose the colour and brightness yourself: a bulb of about 800 lm gives as much light as an old 60 W one, and 2700–3000 K gives warm light. The user replaces the bulb.
The opaque shade sends all the light downwards, diffused by the satin cover, and the manufacturer states ULOR 0% — nothing shines into the sky or into the windows above. The light falls on the wall below the fitting and the ground in front of it.
Where to mount it
IP43 protects against rain falling at up to 60° from vertical, but not against a jet of water from a hose. The manufacturer describes Paris as a general-purpose wall light of classic, simple design — an unadorned half-dome in the Scandinavian manner. The satin diffuser is available as a spare part with code 06160001.