BENIFA is a recessed downlight 4.6 cm across, made of aluminium in matt black. The diode sits deep inside a black conical reflector, and from the outside only a narrow ring flush with the mounting surface remains visible. Two spring clips hold the fitting in the ceiling.
How much space the installation needs
The visible ring is 4.6 cm across and the whole fitting is 6 cm long, so at least those 6 cm have to be free behind a suspended ceiling or in a soffit, along with room for the cable. The mounting hole is cut smaller than the ring so that the ring rests on its edge.
The two metal clips fold out to the sides and press the fitting from inside once it is pushed in — they grip a panel of modest thickness, so this fixing is not suited to a thick concrete slab.
What light it gives
The built-in diode draws 3 W and delivers 159 lm at 3000 K, which is warm white. The beam is 24 degrees wide, so the light forms a narrow pool under the fitting rather than spreading through the room — one unit picks out a section of wall or a step, while a run of them lights a passage.
Colour rendering is above Ra 90, so colours read almost as they do in daylight. The UGR glare index is below 17: the diode set deep in the reflector stays out of sight when you stand directly beneath the fitting.
The source cannot be replaced, but the manufacturer quotes 30,000 operating hours — at three hours a day that is more than twenty-five years. No bulb has to be bought.
Where it may be installed
IP54 means protection against dust and against splashing water from any direction, so the fitting suits a covered terrace, the soffit of a gazebo, or a bathroom. It does not cover protection against water jets or mounting straight out in the rain.
Add your comment about Recessed downlight BENIFA Luces Exclusivas LE62046