SLV NUMINOS GIMBLE L 1006016 is a round recessed ceiling light with a movable head and a chrome reflector inside a black housing. Its aluminium body and distinct ceiling ring give it a restrained, technical appearance. This is the 25.4 W LED version with neutral white 4000 K light and a 40° beam.
Aim the head without moving the cut-out
The head rotates through 355° and tilts vertically through 60°. This lets you change the direction of the light after installation while leaving the ceiling opening in place. Its 40° beam directs light towards a selected part of the interior rather than spreading it evenly in every direction.
Luminaire output is 2350 lm, with a colour rendering index of CRI 90. When planning accent lighting in a living room, entrance hall or shop, consider the head position and distance to the illuminated surface alongside the output. The lumen figure alone does not establish how many fittings a room needs. This particular version has a fixed 4000 K colour temperature.
Allow space above the ceiling
The visible outside diameter is 16 cm, while the required circular cut-out is 14.5 cm. Both the fitting height and the stated installation depth are 11.5 cm. Compare these dimensions with the ceiling construction and available installation space before cutting. This is a recessed fitting, not a surface-mounted ceiling light.
Operation requires a suitable constant-current LED driver rated at 700 mA and at least 25.4 W. Electrical connection must be carried out by a qualified electrician. The instructions require sufficient ventilation and prohibit covering the fitting with insulating material, so these constraints need to be included in the ceiling design.
Black trim with a reflective interior
The matt black surround and shiny chrome reflector suit modern and minimalist interiors where the direction of the light matters more than a large decorative shade. The LED light source forms part of the fitting and may only be replaced by a professional. Clean the outside with a slightly damp cloth after disconnecting the power and allowing the light to cool.