NUMINOS GIMBLE L is a recessed ceiling light 16 cm across, in a white housing with a black inner ring. The ring moves: the whole beam can be tilted and turned rather than only pointed straight down. The fitting works in safety class III, so it is not wired directly to 230 V.
The driver is bought separately
The LED module needs a constant current of 700 mA, and SLV supplies no driver with the fitting — its datasheet lists the drivers as separate accessories, among them no. 1004062 (21–29.5 W, 500/600/700 mA), 1004065 (30 W, 700 mA) and 1004070 (40 W, 700 mA, DALI). Without one of those the luminaire cannot be switched on at all, so it has to be ordered alongside it.
The luminaire itself has no DALI interface — SLV's table reads "DALI capable: No". Whether and how the pair dims is therefore decided by the driver, not by the fitting. The connection cable is 10 cm, so the driver has to sit close to the cut-out.
Cut-out and dimensions
The cut-out is round and 14.5 cm in diameter, and the installation depth is 11.5 cm — that is how much clear space has to be available above the ceiling board. It is considerably more than a flat downlight asks for, so a suspended ceiling with a shallow void will not take this fitting.
The visible part is 16 cm across and the net weight is 598 g. For openings already cut larger, SLV offers 240/150 mm reduction rings, straight and angled, in white and black.
The light it gives, and aiming it
The module produces 2150 lm at 25.4 W, at 2700 K — warm, slightly yellow light. The maker states a half beam angle of 20°, a narrow cone for lighting one chosen spot rather than a whole room. A colour rendering index of Ra 90 means faithful colours, which matters over a worktop, at a mirror and over a picture, while a UGR value of 22 describes the glare level.
The head tilts through 60° and rotates through 355°, so the aim is set after installation. The stated service life is 50,000 hours; the light source is replaceable, but by a professional only. Prismatic, frosted, elliptical and honeycomb diffusers are also available and change the character of the beam.