Rendl SHARM R II R14572 is a twin recessed LED fitting in white and black. Its two circular light points share an elongated trim with rounded ends. A white front and black rings distinguish the light openings from the surrounding frame, keeping the fitting close to the ceiling rather than introducing a hanging shade.
Two LED modules with a narrow beam
The fitting contains two 10 W LED modules that produce warm white light at 3000 K. There is no need to select two separate bulbs for these light points. Rendl specifies a luminous flux of 1800 lm and a beam angle of 24°. This is a concentrated distribution for lighting selected areas, rather than a broad wash intended to cover an entire room from one position.
When spacing several fittings, consider both ceiling height and the position of the surfaces you want to illuminate. Having two light points does not by itself guarantee even coverage between them. The contrasting colours of the fitting also should not be confused with its light colour: the output remains warm white.
Check the ceiling void before installation
The front measures approximately 23 cm long and 11.5 cm wide. The manufacturer gives the mounting openings as 2 × 7.5 cm and the required recess depth as 9 cm. Compare the installation instructions with the available space above the ceiling before preparing the openings. The outer trim measurements are not the cut-out measurements.
The driver is included, and the fitting is intended for connection to a 230 V installation. Installation must be carried out by a qualified installer with the power switched off.
A restrained shape for selected zones
The smooth trim and repeated circular forms suit modern, minimalist interiors. In a living room, kitchen or corridor, SHARM R II can provide focused lighting without a pendant body below the ceiling. The final position should follow the intended beam placement and the available installation space, rather than the appearance of the white-and-black front alone.