SLV ONE 60 PD PHASE UP/DOWN 1004760 is a white ring-shaped LED pendant with a 60 cm diameter. Integrated light leaves the ring both downwards and towards the ceiling, combining direct and indirect illumination in one fitting. Total power is 24 W, and a physical CCT switch allows 2700 K or 3000 K to be selected before installation.
Two light outlets with CRI 90
SLV specifies 1600 lm at 2700 K and 1700 lm at 3000 K. Both outlets have a wide 130° beam, distributing light around the circular profile. CRI 90 supports accurate colour rendering. The colour temperature is set on the CCT switch during installation; it is not continuously adjustable during everyday operation. The LED module has a stated 50,000-hour life and can be replaced only by a qualified specialist.
Phase dimming and dimensions
This PHASE version supports both leading-edge and trailing-edge phase dimmers; it is not the DALI variant. The ring measures 60 cm across and 4.5 cm high, with suspension up to 180 cm. Its white ceiling rose is 18 cm in diameter and 4 cm high. Net weight is 2.21 kg. Gallery views show the CCT switch, cable fixings, scale in a lounge and multiple fittings in a commercial interior.
Ceiling installation in a dry interior
The aluminium fitting operates at 220–240 V, 50/60 Hz with 600 mA secondary current. Class I construction and IP20 make it suitable for dry indoor spaces. It can hang over a table or in a living room, restaurant, hotel or meeting area where the upward component can illuminate the ceiling. The light source and control gear are integrated; connection, CCT selection and any later module replacement should be handled by a qualified professional. Before drilling, establish the centre of the ceiling rose and the position of all three suspension wires relative to the ring. The 2700 K setting appears warmer; 3000 K remains warm white but gives a slightly more neutral impression.
Add your comment about SLV ONE 60 PD PHASE UP/DOWN white LED pendant light 24 W 1600/1700 lm 2700/3000 K 1004760