SLV PLASTRA 148010 is a white wall light with a rectangular plaster cover and horizontal slots that continue around one corner. Its open top, open bottom and slots produce the wall-lighting pattern shown in the photographs, while the plaster surface can be finished with wall paint.
Wall space and installation
Compare the 24 cm height with the clear space between other features on your wall. The body is 9 cm wide and projects 9 cm from the wall, so allow for that projection beside a walkway or an opening door. This is a narrow, upright fitting rather than a broad illuminated panel.
The manufacturer specifies surface mounting on a wall only, on an even surface in a dry indoor area. It is not a ceiling or outdoor version. A qualified electrician must make the fixed connection to the 220–240 V supply; its Class I construction requires a protective earth connection.
One E14 bulb, purchased separately
The fitting has one E14 socket for a bulb rated at no more than 40 W. No light bulb is included, so add a suitable light source before putting the fitting into use. The 40 W figure is the bulb limit, not a fixed power consumption for the wall light.
Brightness and light colour depend on the bulb you choose. The warm glow in the photographs therefore does not define the light output of the fitting as supplied. When replacing the bulb later, the instructions require you to disconnect the power and let the light cool first.
Painting and caring for the plaster
This version is supplied in white. The manual permits ordinary wall paint on the plaster and recommends a suitable primer to achieve good coverage. You can coordinate the cover with your own wall colour; the coloured finishing examples do not represent colours supplied in the box.
Sandpaper for cleaning the plaster surface is included. Disconnect the power and allow the fitting to cool before care work as well. The instructions specify dry, clean storage for the light.