DUOLINE Panel is a linear LED luminaire for Trio's two-phase DUOline track system. Its slim body in matt white plastic is 50.5 cm long, fits straight into the track and runs parallel to it. The LED is built in, so there are no bulbs to buy.
Size and fitting into the track
The body measures 50.5 × 3 × 2.9 cm (length × width × height) and weighs 265 g, so it takes up very little space below the track and stays in line with it.
The adapter in the middle slides into the track and locks with a 90° turn. It carries a phase selector (Phase 1 / Phase 2): on the two-circuit DUOline track this assigns the luminaire to one of the two circuits, so it can be switched separately from fittings on the other phase. The track, power feed and connectors are separate parts of the DUOline system. Trio allows the track to run on the ceiling or on a wall.
What light it gives
The built-in LED module draws 6 W and delivers 850 lm — roughly what an old 60 W bulb gave, but spread along half a metre. 3000 K is warm white, and a colour rendering index of Ra 80 is sufficient for general room lighting; where colours must match exactly, Ra 90 is the better choice. Light leaves through a narrow strip on the underside, so it shines downwards beneath the track.
The luminaire can be dimmed smoothly with a conventional external dimmer; it has no control of its own. The LEDs cannot be replaced, and according to the manufacturer the driver is replaced by a qualified electrician. Trio states a lifetime of 20,000 hours and 15,000 switching cycles.
Where it fits
As a class II luminaire it needs no protective earth conductor, and with IP20 it is intended for dry indoor rooms only. Trio recommends it for living rooms and bedrooms. The shape is minimalist: a plain rectangular bar without ornament in uniform matt white, matching the white DUOline track.