Trysil 1055GR is a complete pole light with an integrated luminaire: a straight extruded-aluminium column bends at the top into a horizontal arm carrying the LEDs. It stands 263 cm tall, the arm reaches 71 cm from the axis, and the powder coat is graphite RAL 7016. The underside is closed by clear, UV-stabilised polycarbonate.
What light it gives and where
The light draws 8.7 W and delivers 1141 lm at 4000 K, a neutral white in which a path or driveway reads clearly without a cold, bluish tint. The Ledil VSM lens spreads the light to IESNA type V — a round pool around the pole — and ULOR 0% means none of it goes up into the sky. The BUG rating B1-U1-G1 confirms low glare and little uplight. Colour rendering is Ra 70, enough for finding your way outdoors but not for judging colours. The manufacturer intends it for gardens, private grounds and architectural lighting.
The driver supports DALI-2 and NightDim mode; it leaves the factory set to full current, and Norlys sets other dimming programmes to order. Dimming from the installation needs a DALI controller — an ordinary phase-cut dimmer will not work.
What else you need and how it is wired
No foundation comes with the pole. The options are ground anchor 180, concrete-in anchor 3091 and mounting adapter 1259 — one of them has to be ordered separately. The terminals take conductors up to 5 × 4 mm², and the lights can be looped through with up to 5 × 2.5 mm² (cable diameter up to 13.6 mm), so several poles along a path can share one circuit. The light is protection class I and needs a protective earth.
Durability and service
IP65 means dust-tight and protected against water jets, and IK10 is the highest impact resistance on that scale. The LED module and driver are replaced by a professional (service kit ZS1054zx0009), so a failure does not mean replacing the whole pole. The manufacturer states an LED lifetime of L90B10 100,000 hours and the same for the driver.
Add your comment about Trysil 1055GR garden pole light, graphite, 263 cm, LED 8.7 W 4000 K NORLYS